Class 11 Physics Chapter 13: Oscillations Notes, SHM Formulas & MCQs
Class 11 Physics Chapter 13 – Oscillations Notes
Class: 11 | Subject: Physics
Chapter: 13 – Oscillations
1. Introduction to Oscillations
Oscillation is the repeated to-and-fro motion of an object about its mean or equilibrium position.
Examples of oscillatory motion include:
- The motion of a simple pendulum.
- The vibration of a tuning fork.
- The oscillation of a mass attached to a spring.
- The vibration of a guitar string.
2. Periodic Motion
A motion that repeats itself after equal intervals of time is called periodic motion.
Example: The revolution of the Earth around the Sun and the oscillation of a pendulum are periodic motions.
3. Oscillatory Motion
Oscillatory motion is a special type of periodic motion in which an object moves repeatedly on either side of a fixed equilibrium position.
Important: Every oscillatory motion is periodic, but every periodic motion is not necessarily oscillatory.
4. Important Terms Related to Oscillations
- Mean position: The equilibrium position about which an object oscillates.
- Displacement: The distance and direction of the object from its mean position.
- Amplitude (A): The maximum displacement from the mean position.
- Time period (T): The time taken to complete one oscillation.
- Frequency (f): The number of complete oscillations per second.
- Angular frequency (ω): The rate of change of phase of an oscillation.
- Phase: A quantity that describes the state of an oscillating particle at a particular instant.
5. Time Period and Frequency
Time period is the time required to complete one full oscillation.
T = Total time / Number of oscillations
Frequency is the number of oscillations completed per second.
f = 1/T
Therefore:
T = 1/f
The SI unit of frequency is hertz (Hz), and the SI unit of time period is second (s).
6. Simple Harmonic Motion (SHM)
Simple Harmonic Motion is a special type of oscillatory motion in which the restoring force or acceleration is directly proportional to the displacement from the mean position and is always directed towards the mean position.
Mathematically:
F = -kx
Or:
a = -ω²x
Where:
- F = Restoring force
- k = Force constant
- x = Displacement
- a = Acceleration
- ω = Angular frequency
The negative sign indicates that the restoring force or acceleration acts opposite to the displacement.
7. Equation of Simple Harmonic Motion
The displacement of a particle performing SHM can be expressed as:
x = A cos(ωt + φ)
Where:
- A = Amplitude
- ω = Angular frequency
- t = Time
- φ = Initial phase or phase constant
Another equivalent form is:
x = A sin(ωt + φ)
The sine or cosine form depends on the initial conditions of the motion.
8. Velocity in SHM
Velocity is the rate of change of displacement with time.
For x = A cos(ωt + φ):
v = -Aω sin(ωt + φ)
The velocity-displacement relation is:
v = ±ω√(A² - x²)
Important points:
- Velocity is maximum at the mean position.
- Velocity is zero at the extreme positions.
Maximum velocity:
vmax = Aω
9. Acceleration in SHM
Acceleration is the rate of change of velocity with time.
For SHM:
a = -ω²x
Maximum acceleration:
amax = ω²A
Important points:
- Acceleration is zero at the mean position.
- Acceleration is maximum in magnitude at the extreme positions.
- Acceleration is always directed towards the mean position.
10. Angular Frequency
Angular frequency is related to time period and frequency by:
ω = 2πf
Since f = 1/T:
ω = 2π/T
SI unit: radian per second (rad/s).
11. Force Constant and Angular Frequency
For a spring-mass system, the restoring force is given by Hooke's law:
F = -kx
Using Newton's second law:
ma = -kx
Therefore:
a = -(k/m)x
Comparing with a = -ω²x:
ω = √(k/m)
Time period:
T = 2π√(m/k)
12. Energy in Simple Harmonic Motion
In ideal SHM, the total mechanical energy remains constant. Energy continuously changes between kinetic energy and potential energy.
(a) Potential Energy
U = (1/2)kx²
Since k = mω²:
U = (1/2)mω²x²
(b) Kinetic Energy
K = (1/2)mv²
Using v² = ω²(A² - x²):
K = (1/2)mω²(A² - x²)
(c) Total Energy
E = K + U
E = (1/2)mω²A²
Important points:
- At the mean position, kinetic energy is maximum and potential energy is minimum.
- At the extreme positions, kinetic energy is zero and potential energy is maximum.
- Total mechanical energy remains constant in ideal SHM.
13. Simple Pendulum
A simple pendulum consists of a small heavy bob suspended from a fixed support by a light, inextensible string.
For small angular oscillations, the motion of a simple pendulum is approximately SHM.
The time period is:
T = 2π√(l/g)
Where:
- l = Length of pendulum
- g = Acceleration due to gravity
The time period of a simple pendulum depends on its length and the local value of acceleration due to gravity. For small oscillations, it is independent of the mass of the bob and approximately independent of amplitude.
14. Spring-Mass System
When a mass is attached to a spring and displaced from its equilibrium position, the spring produces a restoring force.
According to Hooke's law:
F = -kx
Angular frequency:
ω = √(k/m)
Time period:
T = 2π√(m/k)
Frequency:
f = (1/2π)√(k/m)
15. Damped Oscillations
Damped oscillations are oscillations in which the amplitude gradually decreases with time because of resistive forces such as friction or air resistance.
Examples:
- A pendulum oscillating in air.
- A vibrating object gradually coming to rest.
In damped motion, mechanical energy is gradually dissipated, usually as heat.
16. Forced Oscillations
Forced oscillations occur when an external periodic force continuously acts on an oscillating system.
The system oscillates with the frequency of the external driving force in the steady state.
17. Resonance
Resonance occurs when the frequency of an external periodic force becomes equal or very close to the natural frequency of an oscillating system.
At resonance, the amplitude of oscillation can become very large, depending on damping.
Examples:
- A swing pushed at suitable intervals.
- Musical instruments producing strong vibrations.
- Resonance in electrical and mechanical systems.
18. Graphs in SHM
The main graphs associated with SHM are:
- Displacement-time graph: A sine or cosine curve.
- Velocity-time graph: A sinusoidal curve with a phase difference of π/2 from displacement.
- Acceleration-time graph: A sinusoidal curve opposite in phase to displacement.
In SHM, acceleration is always proportional to negative displacement.
19. Important Formulae of Oscillations
| Quantity | Formula |
|---|---|
| Frequency | f = 1/T |
| Angular frequency | ω = 2πf = 2π/T |
| Displacement | x = A cos(ωt + φ) |
| Acceleration | a = -ω²x |
| Maximum velocity | vmax = Aω |
| Maximum acceleration | amax = Aω² |
| Velocity at displacement x | v = ±ω√(A² - x²) |
| Spring angular frequency | ω = √(k/m) |
| Spring time period | T = 2π√(m/k) |
| Pendulum time period | T = 2π√(l/g) |
| Kinetic energy | K = (1/2)mω²(A² - x²) |
| Potential energy | U = (1/2)mω²x² |
| Total energy | E = (1/2)mω²A² |
20. Solved Numericals
Numerical 1: Frequency of Oscillation
Question: A body completes 20 oscillations in 10 seconds. Find its frequency and time period.
Solution:
Number of oscillations = 20
Time = 10 s
Frequency = 20/10 = 2 Hz
Time period = 1/f = 1/2
Answer: Frequency = 2 Hz; Time period = 0.5 s.
Numerical 2: Maximum Velocity
Question: A particle performs SHM with amplitude 0.1 m and angular frequency 5 rad/s. Find its maximum velocity.
Solution:
vmax = Aω
= 0.1 × 5
Answer: 0.5 m/s
Numerical 3: Time Period of a Spring
Question: A mass of 1 kg is attached to a spring of force constant 100 N/m. Find the time period.
Solution:
T = 2π√(m/k)
T = 2π√(1/100)
T = 2π × 0.1
Answer: Approximately 0.628 s
Numerical 4: Time Period of a Simple Pendulum
Question: Find the time period of a simple pendulum of length 1 m. Take g = 9.8 m/s².
Solution:
T = 2π√(l/g)
T = 2π√(1/9.8)
Answer: Approximately 2.01 s
Numerical 5: Maximum Acceleration
Question: A particle performs SHM with amplitude 0.05 m and angular frequency 10 rad/s. Find its maximum acceleration.
Solution:
amax = Aω²
= 0.05 × 10²
Answer: 5 m/s²
21. Important Questions for Exams
- Define periodic motion and oscillatory motion.
- What is simple harmonic motion?
- Derive the equation a = -ω²x for SHM.
- Derive the relation between velocity and displacement in SHM.
- Explain the variation of kinetic and potential energy during SHM.
- Derive the expression for the time period of a spring-mass system.
- Derive the expression for the time period of a simple pendulum for small oscillations.
- What are damped oscillations?
- Explain forced oscillations and resonance.
- Differentiate between amplitude, frequency and time period.
22. Multiple Choice Questions (MCQs)
1. The maximum displacement from the mean position is called:
(a) Frequency (b) Amplitude (c) Phase (d) Time period
Answer: (b) Amplitude
2. The SI unit of frequency is:
(a) Second (b) Metre (c) Hertz (d) Newton
Answer: (c) Hertz
3. In SHM, acceleration is proportional to:
(a) Velocity (b) Negative displacement (c) Time (d) Amplitude only
Answer: (b) Negative displacement
4. The velocity of a particle in SHM is maximum at:
(a) Extreme position (b) Mean position (c) Half amplitude (d) Every position
Answer: (b) Mean position
5. The acceleration in SHM is maximum in magnitude at:
(a) Mean position (b) Extreme position (c) Every position equally (d) Zero displacement only
Answer: (b) Extreme position
6. The time period of a spring-mass system is:
(a) 2π√(k/m) (b) 2π√(m/k) (c) √(mk) (d) k/m
Answer: (b) 2π√(m/k)
7. For small oscillations, the time period of a simple pendulum depends on:
(a) Mass of bob (b) Length and gravity (c) Shape of bob (d) Material of string only
Answer: (b) Length and gravity
8. Resonance occurs when the driving frequency is equal to the:
(a) Zero frequency (b) Natural frequency (c) Double amplitude (d) Damping force
Answer: (b) Natural frequency
9. In ideal SHM, total mechanical energy is:
(a) Zero (b) Increasing (c) Decreasing (d) Constant
Answer: (d) Constant
10. Damped oscillations have:
(a) Increasing amplitude (b) Constant amplitude always (c) Decreasing amplitude (d) Infinite amplitude
Answer: (c) Decreasing amplitude
23. Quick Revision Points
- Oscillations are repeated to-and-fro motions about an equilibrium position.
- SHM is a motion in which acceleration is proportional to negative displacement.
- Frequency is the reciprocal of time period.
- Angular frequency is ω = 2π/T.
- Maximum velocity occurs at the mean position.
- Maximum acceleration occurs at the extreme positions.
- Total energy remains constant in ideal SHM.
- A simple pendulum performs approximately SHM for small angular oscillations.
- Damping causes the amplitude to decrease with time.
- Resonance occurs when driving frequency matches natural frequency.
24. Frequently Asked Questions (FAQs)
Q1. What is oscillatory motion?
It is the repeated to-and-fro motion of an object about its equilibrium position.
Q2. What is simple harmonic motion?
It is oscillatory motion in which acceleration is directly proportional to displacement and directed towards the mean position.
Q3. What is amplitude?
Amplitude is the maximum displacement of an oscillating particle from its mean position.
Q4. What is the relation between frequency and time period?
Frequency and time period are reciprocals: f = 1/T.
Q5. What is resonance?
Resonance is the large-amplitude response that can occur when the driving frequency is equal or close to the natural frequency of a system.
Q6. What is a damped oscillation?
It is an oscillation whose amplitude gradually decreases because of resistive forces.
25. Conclusion
Oscillations is an important chapter in Class 11 Physics. It explains periodic motion, simple harmonic motion, energy changes, spring-mass systems and simple pendulums.
Students should practise the derivations and numerical problems based on time period, frequency, velocity, acceleration and energy in SHM.
End of Chapter 13 – Oscillations Notes.
Comments
Post a Comment
Thanks for your comments